Panel loading that stays accurate
Add a load to a panel and instantly see updated connected load, demand, available capacity, and whether the main breaker is still adequately sized. No spreadsheet required.
What you get
Total connected load on every panel, updated live as you add or change circuits.
Demand load calculated with standard demand factors applied to your connected loads.
Available capacity shown for every panel. Know immediately if a panel is overloaded.
Panel main breaker sizing checked against calculated demand.
Every branch circuit conductor and OCPD sized automatically per NEC.
Available fault current calculated at every panel bus for AIC verification.
Panel loading as part of your electrical model
Spreadsheet-based panel schedules disconnect the schedule from the analysis. In ekx, the panel loading IS the model — every load change updates capacity, sizing, and fault currents.
- Add a circuit and panel loading updates instantly
- See remaining capacity before adding more loads
- Branch breakers and conductors size per NEC automatically
- Fault current at the panel bus is always current
Start free. Upgrade when you need more.
Free tier includes 1 project with up to 2 buses. Paid plans start at $27/month for consultants and $149/month for unlimited access.
View All PlansFrequently asked questions
Panel loading is part of the one-line diagram model. You don't maintain a separate spreadsheet — the panel loading comes directly from the circuits you've built.
Yes. Standard demand factors are applied to calculate the demand load from connected load. You can also adjust demand factors for specific load types.
Yes. Panel capacity is shown with a clear indication of remaining capacity. Overloaded panels are flagged.
Yes. Available fault current at every panel bus is calculated as part of the short circuit analysis. Panel AIC ratings are checked against these values.
Panel loading that updates as you design.
Connected load, demand, capacity, and fault current — all live.
Start Free